Sign In | Join Free | My adobecards.com |
|
Brand Name : Kaienli
Model Number : KSV08-47A-0-N
Certification : Available
Place of Origin : China
MOQ : 1 pieces
Price : USD 5- 40 per piece (depends on the different types )
Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability : usually about 2 weeks, depends on which type and the quantity demand
Delivery Time : 2 or 3 weeks, depends on quantity and design
Packaging Details : Plastic film+PE bag+mesh packaging sleeve+sponge spacer+cardboard box+pallet
Product Name : KSV08-47A-0-N hydraulic solenoid valve with double coil 4 way 3 position threaded on/off control valve
Cavity hole : V08-4 standard cavity
Pressure resistance : 350 bar (5075 psi)
Rated flow : At a maximum of 11.4L/min and 207 bar (3000 psi), the maximum leakage rate is 278 ml/Min
working principle : 4 way 3 position solenoid valve
solenoid coil : DL, DT04-2P, DG DIN43650
Valve Type : solenoid valve on/ off type hydraulic system using
Valve Voltage : 12 or 24 voltage , it is optional choice
Connector : ER or DG or DL , as per your choice
valve block : material : QT500-7 or 6061-T6 raw material
Temperature : -40°C to 120°C, standard nitrile rubber seal
Minimum pick-up voltage : 85% of rating at 207 bar (3000 psi
Product Pictures:
KSV08-47A-0-N hydraulic solenoid valve with double coil 4 way 3 position threaded on/off control valve
Working principle:
Working principle: When the power is cut off, KSV08-47A-0-N stops the oil port of the cylinder and allows the oil to flow from ③ to ①. When coil 1 is energized, the oil can flow from ③ to ② and from ④ to ①. Coil 2
When powered on, allow the oil to flow from ③ to ④ and from ② to ①. The working oil port flow is caused by the area ratio of the oil cylinder. In an unbalanced oil circuit, the return oil with a large flow rate should be directed to the oil port ②. Although the oil port ① can be fully pressurized, it does not need to be used as the inlet port for the valve. Emergency manual control option operation method: During emergency operation, pushing the knurled handle can control the function of coil 2 (S2); Pulling the knurled handle can control the function of coil 1 (S1).
Characteristics:
Working pressure: 210 bar (3000 psi)
Pressure resistance: 350 bar (5075 psi)
Flow rate: At a maximum of 11.4L/min and 207 bar (3000 psi), the maximum leakage rate is 278 ml/Min
Temperature range: -40 ℃ to 120 ℃, standard nitrile rubber seal
Rated load of coil: capable of continuous operation within the range of 85% to 115% of rated voltage
Initial current of coil at 20 ℃: Standard coil: 1.2 A at 12 VDC, 115 VAC (full wave rectification)
At 0.13 amps. E-coil: 1.4A at 12 VDC; 0.7 Amps at 24 VDC
Minimum pull-in voltage: 85% of rated value at 207 bar (3000 psi)
Medium: Mineral oil with a viscosity between 7.4 to 420cSt (50 to 2000ssu) or synthetic oil with lubricating properties
Valve hole: VC08-4
Product technical data:
Product real pictures :
Company Exhibitions:
Our Certificate:
Product processing procedures:
Our new factory and workshop :
Our warehouse:
Shipment:
Different Series of Product , more details please contact us directly:
Hydraulic valves:
Type 1 | soloenid valve |
Type 2 | manual cartridge valve |
Type 3 | 2 way 2 position solenoid valve |
Type 4 | 2 way 6 position solenoid valve |
Type 5 | 2 way 8 position solenoid valve |
Type 6 | Pilot oil resource valve |
Type 7 | explosion proof valve |
Type 8 | balance valve |
Type 9 | check valve |
Type 10 | Hydraulic lock |
Type 11 | Valve manifolds |
Type 12 | valve block |
Welcome your visit and inquiry !
![]() |
Threaded Cartridge Solenoid Valve Hydraulic Double Coil Cylinder Images |